 |
|
Carb Vent Tube Carb change settings when you put the cowl on? By using our carb vent tube, the carb diaphragm sees the same pressure as the carb intake eliminating the reaction to changing pressures within the cowl, and eliminating that mid range burble. Simply remove the two bolts at the bottom of your carb, and bolt on our carb vent. Solder or tap a tube to your carb's air inlet (not included), and attach at least an 1/8" ID fuel tubeing from the tube to the vent tube. An easy solution for your Walbro carbs. |
|
$10 |
|
|
